 |
|
HOME > PRODUCTS > STEEL REINFORCED CROSSINGS
| Steel Reinforced Crossings |
The Steel Reinforced grade crossing system includes a virgin rubber panel reinforced with a 1/4" corrugated steel plate, installed on transverse or longitudinal, pressure-treated, hardwood shims.
The virgin rubber absorbs the impact of concentrated loads such as lift trucks, while the steel plate provides the strength to carry heavy loads. The Steel Reinforced system is ideal for low MGT, heavy truck use, such as intermodal yards and private industry. With the purchase of the Goodyeartm product line, OMNI is the only supplier of this type of product. |
|
 |
 Solid Flange Option
|
|
|
Knotts Berry Farm Bridge
|
 |
Steel Reinforced Cross-Section
|
Steel Reinforced Specifications
|
 |
|
 |
|
Panel Length
 3 Feet
Panel Heights
Accommodates 30# to 155# Rail Weight
Rubber/Steel Panels: 3 inches thick
Hardwood Shims: 2- to 5-inches thick
Panel Widths
Gauge Panel: 58 1/2 inches
Field Panel: 21 1/2 inches (8'6" tie)
Wide Field Panel: 24 1/2 inches (9' tie)
Fasteners
Timber Screws, 5/8 x 10 1/2 inches
Medium Carbon Steel
Tensile Strength 150,000 psi minimum
Pullout Resistance +/- 13,000 pounds |
|
Panel Hardness
Rubber: 65 +/- 5 Durometer Shore A
Steel: 130 Brinnel
Min. Tensile
Rubber: 2,000 psi
Steel: 65,000 psi
Min. Elongation
Rubber: 400%
Yield Point
Steel: 55,000 psi Minimum
Options
Solid Flangeway (for special applications)
End Deflectors
Custom-made panels for curves up to 24 degrees
Custom-made panels for narrow gauge |
|
|
 |
|
 |
|
|
| > Installation Instructions, Click Here |
|
| < BACK TO RUBBER |
|
|
