OMNI Rail Grade Crossings
OMNI Rail Logo Products Home Quality Contact News

(Click photos to zoom)
OMNI Rail Crossings - Rail Example #4

OMNI Rail Crossings - Rail Example #5

OMNI Rail Crossings - Rail Example #6

Products > Steel Reinforced (SR) Crossing

The Steel Reinforced grade crossing system includes a virgin rubber panel reinforced with a 1/4" corrugated steel plate, installed on longitudinal, pressure-treated, hardwood shims.

The virgin rubber absorbs the impact of concentrated loads such as lift trucks, while the steel plate provides the strength to carry heavy loads. The Steel Reinforced system is ideal for low MGT, heavy truck use, such as intermodal yards and private industry. With the purchase of the Goodyear™ product line, OMNI is the only supplier of this type of product.

Steel Reinforced Cross-Section

Steel Reinforced Specifications

Panel Length
  • 3 Feet

    Panel Height:
  • Accommodates 20# to 141# Rail

    Gauge Panel Width:
  • 58 1/2 inches

    Field Panel Widths:
  • 24 1/2 inches (9-foot tie)
  • 21 1/2 inches (8-foot 6-inch tie)

  • Steel Reinforcment
  • Type: 1/4 inch corrugated steel (C1008)

  • Type: Virgin SBR
  • Tensile: 2,000 p.s.i.
  • Hardness: 65 + 5 Durometer Shore A
  • Elongation: 400%

  • Timber Screws, 5/8 x 10 1/2 inches
  • Medium Carbon Steel
  • Tensile Strength 120,000 psi minimum
  • Pullout Resistance + 13,000 pounds
  • Installation Instructions Typical Setup

    French & Spanish Translations: OMNI Grade Crossing Systems | designed by dim7chord