OMNI Rail Grade Crossings
OMNI Rail Logo Products Home Quality Contact News

(Click photos to zoom)
OMNI Rail Crossings - Rail Example #1

OMNI Rail Crossings - Rail Example #2

OMNI Rail Crossings - Rail Example #3

Products > TraCast™ Crossing

The OMNI TraCast™ grade crossing design is a system of precast concrete modules with a minimum compressive strength of 6,000 psi. Elastic fasteners are used to secure the rail to the base of the rail troughs. The module design eliminates the use of ties and ballast.

A continuous protective rubber rail boot insulates the rail from electrical interference. RailGuard™ rubber panels are installed on the gauge side of the rails to provide a positive flangeway and rail cushioning. The RailGuard™ rubber panels can be easily removed with a lining bar, eliminating the need of heavy equipment, for rail inspection and repair.

OMNI's TraCast™ system is ideal for highway, industrial, port and transit use.

TraCast™ Cross-section

TraCast™ Specifications

TraCast™ Module
  • Length: 6 feet
  • Height: 13 1/4 inches
  • Width: 7 feet 11 inches
  • Weight: 7000 pounds
  • Accomodates: 115# to 136# Rail

  • ASTM A615 (Tied)

  • Compressive Strength: 6,000 psi
  • Entrained Air: 6.0% ± 1%
  • Max Water/Cement Ratio: 0.44
  • Salt Sealer: Co-Ma-Seal CM

  • Four 2-ton embedded lifting hooks
  • Attach to 4-way rigging

  • RailGuard
  • Type: Virgin SBR
  • Tensile: 2,000 p.s.i.
  • Hardness: 65 ± 5 Durometer Shore A
  • Elongation: 400%

    Protective Rubber Rail Boot
  • Type: Santoprene™
  • Tensile: 1,600 p.s.i.
  • Hardness: 80 ± 5 Durometer Shore A
  • Elongation: 400%
  • Volume Resistivity: 1 x 1012 (min)

    GripTite Cone Nuts
  • Used to Anchor RailGuard Rubber Panels
  • Material: Polyurethane

    Rail Fastening
  • Spring Clip: FLEXICLIP, 1095 Steel
  • Spring Clip Insulator: Type I, Dupont Zytel
  • Hex Head Bolt: 3/4-inch NC

  • Installation Instructions Typical Setup

    French & Spanish Translations: OMNI Grade Crossing Systems | designed by dim7chord