OMNI Grade Crossing Systems
Quality
Contact
Manufacturing
Home

HOME > PRODUCTS > FULL-DEPTH HEAVY DUTY CROSSINGS

Full-Depth Heavy Duty Crossings

The OMNI Heavy Duty rubber grade crossing system is the most durable full-depth rubber crossing available. Made of 100 percent virgin rubber, the Heavy Duty system is designed to withstand repeated punishment of high-speed, heavy traffic loadings. This product's durability, long life and low maintenance requirements make it ideal for most applications. Heavy Duty panels can be reused when a crossing is reconfingured or closed. Heavy Duty panels can be used with most rail fasteners.



Full-Depth Heavy Duty Cross-section
Full-Depth Heavy Duty Specificationss
Panel Length:
3 Feet

Panel Height:
Accommodates 85# to 140# Rail Weight

Panel Widths:
Gauge: 58 1/2 inches
Standard Field: 22 inches (8'6" tie)
Wide Field: 25 inches (9'0" tie)

Hardness:
65 + 5 Durometer Shore A

Min. Tensile:
2,000 psi

Min Elongation:
400%		 Fasteners:
Timber Screws, 3/4 " x 7 1/2 "
Medium Carbon Steel
Tensile Strength 150,000 psi Min.
Pullout Resistance +13,000 lbs

Options
End Deflectors: 10 ga. Galvanized Steel
Fastened with 3-inch Lag Screws
Pandrol Clip Relief
Rail Grind Relief
Standard panels can be installed on curves up to 8 degrees, 72' or less in length. Custom panels can be designed for curves greater than 8 degrees.
> Installation Instructions, Click Here
< BACK TO RUBBER
Home | Products | Quality | Contact | Manufacturing Sites